Control all movement,including attitude stabilization, speed
control, position locking. CCD sensor tocapture picture of ground,
comparing pictures to avoid drifting. Switch workingmode
(horizontal mode and position mode) through AUX channel.
Integrating headlocking gyro and swashplate mixer.
Controlsensitivity and mode of internal gyro through GEAR channel.
Support swashplate3S 120º, 3S 140º, 4S 90º, 4S 90º+45º Keep balance
ininverted flight. Configure bycomputer through USB. If you are
using FM/PPM remote control device, whenhelicopter is out of
control, the Flymentor 3D will set aileron, elevator,rudder to
neutral, and keep pitch in the final signal position, and switch
topositioning mode automatically, the sensitivity is 70%.
-Voltage: 4.8-6.0V -Current: 55mA (under 5V) -Temperature: 0~ +40
-Under the stabilisation mode and positioning mode, maximum rotate
speedallowed: -Aileron and Elevator: ≤200°/ s -Tail turning (if
using external gyro): ≤360°/ s
- KDS Flymentor 3D x 1 set